对转换层结构中应用短肢剪力墙问题的探讨

文章通过对某转换层结构分别采用一般剪力墙和短肢剪力墙两种不同方案进行弹性阶段对比分析,得出将短肢剪力墙应用到转换层结构中对结构抗震性能的影响,并提出一些设计建议。     

基于本体几何特征分析的产品制造行为推理

将本体理论应用于产品制造行为建模和推理中.通过分析零件的加工面邻接图,逐个提取产品的几何特征,从而形成制造行为的静态本体模型;以无向图的布尔运算和本体建模理论作为基础,分析零件的加工进刀方向,对静态本体模型中的特征归纳优化,形成可供分析的几何本体的过程序列模型.     

基于刚度及经济的CFRP与钢组合拉索设计理论

基于钢斜拉索、碳纤维增强塑料(CFRP)斜拉索适用跨径研究结果,针对1 400~2 800 m主跨斜拉桥整体刚度不足提出一种新型结构方案,即基于刚度及经济性能的CFRP与钢组合拉索方案.该方案将CFRP斜拉索与传统钢斜拉索同时应用于斜拉桥中,将２种材料高强轻质及弹性模量高的优点进行组合,以充分提高斜拉索的等效刚度,进而提高斜拉桥的整体刚度.详细介绍该组合方案设计思路与方法,通过比较等效刚度以及经济性能给出２种材料斜拉索推荐组合比例.最后,通过一座1 400 m主跨CFRP与钢组合拉索斜拉桥试设计说明该方案相对传统方案整体刚度上的优势,证明其工程应用的可行性,是主跨为1 400~2 800 m斜拉桥的优选方案之一.     

Improvement of pitting corrosion resistance for Al-Cu alloy in sodium chloride solution through equal-channel angular pressing

Significant corrosion resistance improvement was achieved in solid-solution treated (T4) Al-Cu alloy after severe grain refinement through equal-channel angular pressing. The bulk ultrafine-grained Al-Cu alloy with grain sizes of 200 ? 300 nm has higher pitting potential (elevated by about 34 mV, SCE) and lower corrosion current density (decreased by about 3.88 μA/cm²) in polarization tests than the as-T4 alloy, and increased polarization resistance (increased by about 5.7 k ?·cm²) in electrochemical impendence spectrum tests, along with alleviated corrosion damage in immersion tests. Two factors responds to the improved corrosion resistance of the alloy: the first is the refinement of residual θ -phase (Al2Cu) particles leading to the lower micro-galvanic currents and reduced susceptibilities to pitting corrosion, the second is the mass of strain-induced crystalline defects provid ing more nucleation sites for the formation of more volume fractions of stable oxide film.     

Corrosion and electrochemical behavior of as-cast Mg-5Y-7Gd-1Nd-0.5Zr magnesium alloys in 5% NaCl aqueous solution

The corrosion mechanism of the as-cast Mg-5Y-7Gd-1Nd-0.5Zr magnesium alloy immersed in 5% NaCl aqueous solution was investigated by electrochemical test and SEM. The electrochemical results indicate that the corrosion resistance of Mg-5Y-7Gd-1Nd-0.5Zr alloy in 5% NaCl aqueous solution gradually deteriorates with immersion time increasing from 2 h, 24 h, 60 h, to 108 h, which is consistent with th e SEM observation of corrosion morphologies. The Cl^-anion leads to the initiation and development of the corrosion pits, and Mg-5Y-7Gd-1Nd-0.5Zr alloy exhibits filiform type of attack under significant anodic control of magnesium solution reaction. The corrosion potential becomes noble with increasing immersion time.     

Influence of Mg_5Ga_2 compound on microstructures and electrochemical properties of Mg-5%Hg-22%Ga alloy

The Mg-5%Hg-22%Ga(mole fraction) alloy was melted.Aging at 573-673 K for different times was carried out to ensure the fine dispersion of the Mg_5Ga_2 compound.Scanning electron microscopy(SEM),X-ray diffractometry(XRD) and energy spectrum analysis(ESA) were employed to characterize the microstructures and phases of the Mg-5%Hg-22%Ga alloy.The electrochemical and corrosion behaviors of the above alloy were studied by potentiodynamic,galvanostatic and electrochemical impedance spectroscopy(EIS) measuremen...     

Cellulose nanocrystals as green fillers to improve crystallization and hydrophilic property of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The green nanocomposites of poly(3-hydroxybutyrate-co-3-hyd roxyvalerate) (PHBV) with various cellulose nanocrystals (CNCs) contents were prepared by solution casting method. Th e effects of CNCs on the crystallization behavior, spherulitic morphology, crystal structure and hydrophilic property of PHBV were studied by differential scanning calorimeter (DSC), polarized optical microscope (POM), wide-angle X-ray diffraction (WAXD) and static water contact angle measurement. It is found that the CNCs act as an effective nucleation agent for crystallization of PHBV, inducing an increase in the melt crystallization tempera ture of the nanocomposites. A study of the non-isothermal crystallizatio n kinetics further illustrated that overall crystallization rate of PHBV in the nanocomposites was faster than that of neat PHBV, but exhibited a decrease in the crystallinity and the spherulite size of PHBV. Furthermore, the contact angle decreased from 60.1° for neat PHBV to 32.5° for the nanocomposites with 10% CNCs (mass fraction).     

具有边界记忆项波动方程的初边值问题

研究一类具有边界记忆项的非线性波动方程的初边值问题,利用Galerkin方法、紧性原理得到了整体解的存在性,利用补偿能量法得到了解的渐近性.     

生物柴油金属腐蚀安定性研究

文章考察了铜、铁、铝和不锈钢4种金属浸泡在菜籽油生物柴油(RME)中经受腐蚀后,生物柴油油品的物理化学性能变化情况,以期对生物柴油的腐蚀安定性作全面了解;同时,对市售0#柴油经受4种金属腐蚀试验后的理化性能进行研究.结果表明:在43℃下,4种金属浸泡60 d后,紫铜对生物柴油的理化性能影响最大,导致生物柴油的酸值增大约...     

纳米复合稀土永磁体Pr9-xDyxFe84.4-yCoyGa1Mn0.6B5（x=0,1,y=0,8）的反磁化行为和磁粘滞性

用电弧熔炼法制备了Pr9Fe84.4 B5Mn0.6 Ga1和Pr8Dy1Fe76.4 Co8B5Mn0.6 Ga1合金铸锭,然后利用熔体快淬法获得相应的薄带样品.分析了起始磁化,反磁化过程及样品的磁粘滞性,结果表明,两样品在室温下表现为单一硬磁相磁化行为,在低温下表现为双相行为.Co和Dy的联合添加使软磁相的晶粒尺寸减小,而晶粒间交换耦合作用增强,样品的形核场增大.磁粘滞性研究表明,Co和Dy联合掺杂的样品磁粘滞系数的增大是由软磁晶粒大小的减小导致热激活体积增加而引起的.